Category: BMWs

BMW N63 Problems to Expect – Reliability Report

Posted on by

Hey guys and welcome back to the SimpleCarGuy channel. BMW N63 is a twin turbo V8 engine that has been powering fast BMWs for over a decade and today we will talk about the common issues, technical updates, best and worst years to buy and my 4-year experience with the engine.

History

The BMW N63 replaced the naturally aspirated N62 V8 engine and had many improvements over the years. It was also the first hot-V layout, first direct injected and first turbocharged V8 engine from BMW.

This engine begun production in 2008 and is still being used in many BMW vehicles. Of course, over the years there were 3 technical updates creating 4 different versions of the engine, adding more horsepower and torque, improving reliability and making a better engine overall. There are lots of forum posts and groups discussing different issues on different version of the engine and it can be a little difficult to keep up. I have sorted through most of this information over the 4 years I had this engine in my BMW 550i and organized it in this video. I will explain the difference between each version and what was updated as well as what BMW models the specific version of the engine was used in. Let’s get to it!

BMW N63

The original N63 engine was first used in the E71 X6 and produced 402 HP and 443lb ft of torque and later used in the 550i, 750i, X5 and X6 between 2008 and 2013 with the exception of the 650i where it was used from 2012 to 2017.

Common Issues:

If you have heard horror stories about the N63 engine, it was probably about this version of the engine, but there are a few common issues across the entire run. To start with, most of these engines will burn some oil. This original version will do so excessively and it’s important to make sure you never run low. In addition to burning oil, the timing chain is a weak point on these and becomes an issue at higher mileage. As soon as you can hear any chain rattle, it should be replaced as soon as possible. Another common failure on this engine was the HPFP and injectors which caused the engine to stutter, lose power and run very rough in most cases. On top of these, there were also issues with mass air flow sensors, vacuum pump, low pressure fuel sensor, turbo seals and crankcase ventilation lines.

Obviously, that is a huge list of common problems on these original BMW N63 engines, but luckily BMW took ownership of the problem and issued a voluntary recall called the Customer Care Package where they revised the service internal from 15,000 to 10,000 miles and fixed or replaced any issues related to the timing chain, fuel system, battery, vacuum pump, crankcase vent lines and more! This helped many owners at the time and prevented many unhappy owners in the future. If you are looking at a BMW with this engine [show cars again], check that this service has been performed or the items have been serviced individually. This is a must.

BMW N63TU

Clearly that was a lot and BMW realized that they had some major issues they needed to fix here and that’s what they did. In 2012, they have redesigned most of the engine in the Technical Update 1. The new engine was now known as the N63TU and it got an updated timing chain, forged rods and crank, new pistons, turbos, injectors and HPFP. On top of that, they changed the VANOS system to the one used on the N55 engine and updated the crankcase ventilation on a new valve cover among many other things. Not only did all of these changes make a huge difference in reliability, it also added 42 more HP and 37 lb ft of torque. This engine was used in the same range of cars as the previous version. [list on the screen]

Common Issues:

That’s a lot of changes, but did any of this help? Actually, YES! The BMW N63tu is a much more reliable engine, but being a typical BMW, it still has its common issues. Oil consumption is typical if thinner oils are used or not changed as often and it can burn a quart of oil between changes, but if you see some smoke out of the tail pipes, it could be much worse as it could be an indicator that the valve seals need to be replaced. My friend had this happen at 35k miles, but the dealer covered it completely. As per BMW, the engine has to be pulled out of the car to do this job and it can get very, very expensive if out of warranty. Of course, there are other minor issues that can creep up on this engine, but nothing too excessive. I’ve seen reports of leaking   here and there but nothing engine destructive. A much better and more reliable engine.

BMW N63TU2

Next update came in 2016 and the biggest change this time was switching to twin-scroll turbochargers giving the engine a wider powerband. Other changes were mostly there to support the turbo upgrade and to optimize the engine. The stock power levels remained the same and so did the reliability. This engine was used in the 750i as well as the M550i between 2016 and 2020. [list on the screen]

Common Issues:

Luckily these changes have made the N63TU2 engine even more reliable with not many common problems. The oil consumption has been reduced and if you change your oil every 7000 miles, you shouldn’t have these issues. A couple problems I’ve seen come up from time to time were leaky coolant lines as well as issues with intercoolers which were covered by a service bulletin from BMW. Overall, a very solid engine.

BMW N63TU3

The last version of the BMW n63 engine is the N63TU3 which is once again used in the top-of-the-line versions of each series. There is a lower powered version making 456hp and 479lb ft that’s used in the regular X5 and X7. This engine received a new ignition system and improved thermal shielding for the crankcase and cylinder head and even forged rods from the S63 engine. The valve stems have been updated as well. The more powerful version of the N63TU3 is used in the M versions of the 5, 7 and 8 series as well as X5, X6 and X7 SUVs. [but not actual M5, M7, M8 etc] It includes all of the updates already mentioned as well as larger turbochargers, different ignition system, rebalanced crankshaft with new main bearing shells, piston skirt coating and electric arc wire sprayed cylinder walls. All of these upgrades result in massive power gains making 523 HP and 553lb ft of torque and it’s not even an S63 motor.

Common Issues:

There isn’t too much information on these engines as far as reliability just yet as they are still fairly new, but since the valve stems have been upgraded among many other things, the engines seem to no longer burn oil even with hard driving. Overall, the N63TU3 is the most reliable and most powerful N63 engine with a decade of improvements and upgrades.

Best and Worst Years:

So, what are the best and worst years to buy a BMW with the N63 engine? In my opinion, unless you are willing to deal with the issues or they have already been completely taken care of, I would skip the original N63 engine cars and go for 2014 or newer models to be safe. [put list of years when switched]. Of course, if you got the cash, the latest N63TU3 is a beast and makes for a very fun driving car with no reliability issues but will cost a pretty penny. [Driving X6M] I think that N63TU and N63TU2 are a bargain at the moment with decent reliability and power figures and that’s the ones I would go for.

Personal Experience:

As I mentioned earlier, I owned a 2014 BMW 550i for over 4 years, so I had the N63TU engine and I have to say, it was VERY reliable for ME. In all of that time, all I have had to do was change the ignition coils and spark plugs around 60k miles and of course changed the oil every 5k miles! This is very important to keep these running smoothly.

Conclusion:

In conclusion, this engine gets a bad rap based on the early years, but many issues have been fixed on the second iteration of the engine and further perfected over the years. I wouldn’t hesitate to own another N63 powered BMW as long as it’s 2014 or newer and has been taken care of properly over the years. A healthy BMW N63 provides a very powerful, fun, sporty and torque-y driving experience that’s hard to get anywhere else. Check out my BMW N20 reliability report video and stay tuned for the BMW N55 video coming soon. Thanks for watching, leave your thoughts, suggestions and comments down below and I’ll see you in the next one.

BMW N20 Problems to Expect – Reliability Report

Posted on by

Hey guys and welcome back to the SimpleCarGuy channel. So, you are looking at a BMW with the N20 engine and want to know how reliable it is? Well, you found the right video as today we will be talking about the common issues, best and worst years to buy, what to do if you already have this engine in your car and my experience after 2 years with this car.

History:

We’ll start with a little background and history as I think it’s important to understand before we talk about the common issues and problems. I swear this will only take a minute! The BMW N20 engine was designed to replace the N52 and N53 6 cylinder naturally aspirated engines that were among the most reliable engines produced by BMW and used in most ‘common’ BMWs. Even though the N20 engine is a 4 cylinder, it produced similar power figures and powered equivalent models. Of course, this means the engine has been turbocharged, direct injected and used other top of the line technology for 2011 to achieve this performance.

There were a few different version of the BMW N20 engine manufactured from 2011 to 2017 and used in many different vehicles. Europe and other countries have the optional lower power 180hp version in their 320i, 420i, 520i and other ‘something’20 cars, but in North America we only had the 240hp version and that’s the version I will concentrate on in this video since the biggest difference is actually tunning and support components and not the engine itself. So, it mostly applies to both. North America got this engine in the Z4 (point to it), X1, X3 and X4 SUVs, 3, 4 and 5 series and even in the sDrive40e X5 where it was mated to the hybrid electrical motor. So, clearly it was used across most of the BMW range. [Show which cars it was in on the screen like I had the list in the emergency kit video]

Common Issues:

Alright, so what are the common issues then? The worst common issue on the BMW N20 engine has to be the timing chain issues that have been discussed at length. To summarize, BMW has used brittle plastics for the timing chain guides which break or crack after a certain period of time causing the timing chain to get loose and eventually skip timing, eventually destroying the engine. Hopefully it never gets that far and you notice the chain rattle way before that and get the chain replaced. In some cases, the chain tensioner is the culprit behind the loose chain and since it’s very easy to change, it can be a good first step before taking the engine apart.

The second big issue on the N20 engine is the rod bearing failure. This one is even more serious, but luckily not as common as the chain guide issue. If you start hearing a slapping type noise like this, you might be looking for a new engine. While the rod bearings are not impossible to replace, unfortunately, the crankshaft gets damaged in the process as well and to fix the journals on the crankshaft, the entire engine has to be taken apart. If there is any hint of rod bearings going bad on your engine, it’s time to replace those NOW.

With the scary items out of the way, let’s talk about some of the common issues that you can probably DIY or get done without spending a fortune. Just like with the N52 and N53 engines, the valve cover is plastic and has a tendency to crack and/or leak oil. This wouldn’t be a huge problem, but it usually leaks all over the exhaust and O2 sensors, which can be damaged in the process… not to mention the smell of burning oil.

Similarly, the oil filter gasket issue has been carried over from the older engines and can leak. Luckily this one is very easy and inexpensive to replace, but if it’s not replaced, it will leak all over the serpentine belt which can cause some serious engine damage.

We are getting closer to the end of the list, but there are a few more items to mention. As we know this is a turbocharged engine and as such it has a wastegate. Unfortunately, the design of it allows the wastegate flapper to get loose overtime and start making a noise. This wastegate rattle isn’t a huge problem at first as it just makes an annoying noise, especially when you start the car, but the looser it gets the more of an issue it can be as it won’t hold boost and degrade performance of the engine.

This engine is also direct injected as mentioned earlier and produces low emissions, which is great but it also means that carbon build up isn’t uncommon. The injectors themselves are also pretty high tech and can fail causing drive train malfunction messages and stuttering of the engine while driving. Check out this video on how to replace the injectors on this engine in the top right corner or the description.

The last item I want to talk about on the N20 engine is the high-pressure fuel pump. These were a huge problem on the N54 engines, but luckily not as huge of a problem here. They still do fail on these engines but at least they are not as expensive and can easily be replaced in half an hour. I’ve done it on this engine and here is how.

As these engines are becoming older and older, it’s also a good idea to check the coolant hoses for cracks, make sure the chargepipe is not cracked and inspect the vacuum lines for any leaks. The most expensive part of fixing BMWs is the labor, so maybe it’s good to tackle some of the easier projects yourself and learn more about your car in the process.

Best and Worst Years:

So, what issues got fixed over the years and what are the best years to buy then? [put this on the screen] In most cases, that doesn’t really matter, but with this engine there is a big difference. The only N20 engines I would recommend would be the ones build in 2015 and later as they have fixed most of the issues discussed here on those models. They improved the timing chain guides, changed the injectors to EU6 from EU5 and improved the overall reliability. If you are considering a BMW with the N20 engine between 2011 and 2014, I would make sure that all of the issues we discussed have been taken care and the maintenance has been on time, but especially the timing chain replacement.

Longevity:

What can you do?

Now, it may sound bad on the surface and I’ll admit it’s not the best engine in the world, but these engines are in thousands of vehicles and a lot of them have no issues at all or the issues have already been fixed. So, as with most BMWs, if you take care of them properly and do some extra maintenance they will last much longer. A few examples of that would be to check your oil every other fill up and change your oil every 5k miles and not every 10k miles as recommended by BMW. This will help with preventing rod bearing failure. Also, check for oil leaks and take care of those fast before they cause more damage and a lot more expensive repairs in the future. Lastly, if the timing chain has not been replaced on your early N20 engine, get it done before it’s too late!

Personal Experience:

As for my personal experience, I bought this BMW Z4 with a bad engine, but looking at its history, it was maintained by the dealer as per the book. You can follow my early videos on this car where I go through the process of replacing the timing chain, HPFP, injectors, fixing the wastegate rattle and eventually tearing apart the broken engine to reveal the damage done by a spun rod bearing. However, ever since I installed a 2015 engine in this car, it has been running like a dream for the last 2 years.

Conclusion:

All in all, this is not a bad engine, especially after the improvements done for 2015 and newer models and the other issues are only becoming common on engines with very high mileage. A lot of it also has to do with how the engine was taken care, driven and of course some luck on how it was built that day at the factory. With any luck, a well taken care of BMW N20 engine should be reliable and also inexpensive to maintain while providing a smooth, enjoyable and sporty drive. Stay tuned for the reliability video on the N55 and N63 engines in the near future, thank you so much for watching and I’ll see you in the next one!

BMW 550i Journey – 4 Year Ownership Report

Posted on by

Hi guys and welcome back to the SimpleCarGuy channel. BMW 5 series is one of the most popular luxury sedans on the market and I’ve had the pleasure of owning this one for over 4 years. Welcome to my 4-year ownership journey with the BMW 550i where I will talk about why and how I bought it, problems over the years, some of the mods I’ve done, why I’ve had it for all these years and finally, why I sold it.

WHEN/WHY/HOW I BOUGHT IT:

About 4 and a half years ago I was driving a 2009 BMW 335i Coupe and was looking to upgrade to the BMW 435i M-Sport. It was a logical choice as both were 2 door sport cars with a 3-liter turbo engines, great design and very sexy curves. I visited all dealers in my area as there were practically no second-hand cars at the time and what I found was overpriced coupes that didn’t have the options I wanted and sales people that didn’t seem interested in selling me the car. There was one guy that seemed more interested in talking about cars rather than just trying to sell me a car and he offered me to go drive any car I wanted on the lot. We jumped into a few cars and most were great, but I was really, really impressed with the 475hp and lots of torque from the N63 V8 engine in this BMW 550i. It was smooth, comfortable and pulled harder than it had a right to being a big 4 door sedan. I never looked or even driven a 5 series until this time and I was impressed. The car only had 34000 miles and all of the options you could imagine. We’ll talk about those later in the video. I offered him $5000 less than what they were asking for and after some negotiations, I worked out a good deal and a set of 4 new run flat tires to boot.

PROBLEMS OVER THE YEARS:

BMW V8s are not known to be the most reliable and at the time, I didn’t have a garage I could wrench on this car if something were to happen, so I was a little worried. Luckily the car came with a little over a year of warranty. I never needed the warranty and honestly this was one of the most reliable cars I have ever owned. Here is everything I’ve had t o do to the car over the years. I changed oil every 5-6k miles, I changed the rear brakes and later on the front bakes and I replaced the sparkplugs and coils after a misfire when I did a hard pull on the highway. Luckily, I didn’t have, high pressure fuel pump, injector or any kind of oil leak problems that people bring up every time they hear a BMW N63 engine. I’ve made a video on Problems to expect on these cars and if you’ve watched it, you’ll know that the problems are mostly on the pre-LCI, 2013 or older version of the car.

WHY I KEPT IT FOR 4+ YEARS:

Whether it was luck or I just did a decent job at maintaining the car and not beating on it too much, it obviously has been very reliable for me. So, was that the reason why I kept the car for so long? Usually, I get bored of a car after a couple of years, I sell it and I get something different, but in this case, this car just had too much to offer and never felt outdated even after 4 years. Not only was this car powerful even by today’s standards, it had a very smooth power delivery (include 0-60 video), felt absolutely planted and stable at high speeds and handled road trips better than any other car I’ve ever been in. What I loved the most about it though, was how understated it was. I love flashy cars as much as the next guy, I mean, I have a blue Z4, but there is something about a car that looks like a big ol boat but performance on par with a lot of sport cars. Using launch control, it can do close to 4 second 0-60 and around 4.5 seconds for a regular start. If you remember that this car weights around 4400lbs, has space for 5 people and a few suitcases, features like heads up display, comfort access and soft closing doors, 18 way adjustable seats and you can even open the trunk with your foot, it becomes obvious why I would keep this car for sol long.

THE MODS:

Part of keeping the car understated, but also giving it a little bit of attitude and removing some of the mid-level manager feel of the car WAS to add a few mods. I didn’t touch any performance modifications on this car as I wanted to keep it as reliable as possible and I was happy with the amount of power it had, anyway.


One of my pet-peeves on modern cars is fake chrome and orange reflectors. The first thing I did was replace the chrome kidney grills and shortly after, the orange reflectors with grey ones, which I think fit the car much better. In fact, this was my first video that I posted on this channel, even before I thought of becoming a “Youtuber”. You can say that this simple mod started me on this YouTube journey and gave me confidence to continue working on cars. Over the next few months, I blacked out the chrome pieces in the bumper, on the side of the car and even on the door handles. Adding a spoiler to the trunk and tinting the windows completed the look I was going for.

One other item I would definitely recommend upgrading on the interior would be the navigation system. I added CarPlay functionality to modernize the car and bring it into this decade.

Thinking back on this, I do wish I would have gotten better wheels for it and maybe put a sporty exhaust on it, but it would also ruin the entire understated feel of the car I tried to maintain.

WHY I SOLD IT:

Now comes the big questions, why did I sell this car I liked so much? I wish I had a very elaborate and cool story to tell here, but honestly it was mostly because I haven’t been driving it since the pandemic started. Back when I was commuting 50-60 miles every day, this car made perfect sense, but now just watching it sit there for days at a time, not being driven, just didn’t make sense and she had to go to a better home. Of course, the fact that the prices are way higher than I could have sold it even 2 years ago and the fact that I have 3 more vehicles at home made that decision a little bit easier. Overall, these are still a great deal in my opinion as long as you know how to take care and maintain these beasts. I really do hope the feature owners enjoys and cherishes the car as much as I have over the years.

WHAT AM I BUYING NEXT?

This, of course, brings up another question, what will I get next? Well, since it doesn’t look like I will be going back to the office for at least another half a year, I will most likely keep driving what I have and keep getting better in the snow in my rear-wheel-drive Z4. I also, like the idea of BMW I3 and how quirky and weird it is, but eventually I will need a vehicle that’s be really good in winter. BMW Z4 is my current main ride and as fun as it is in the snow, it’s not very good once we have over a few inches. I’d love to hear your recommendations on what I should get next. Should I got for the BMW M550i, maybe a 6 series or should I be looking for Porsche? Leave your comments down below.

With all of that said, I’m sad to see my BMW 550i go, but more fun and fast cars to come in my future. Thank you, guys, so much for watching and I’ll see you in the next one!

BMW R NineT Problems to Expect

Posted on by

Hey guys and welcome back to the SimpleCarGuy channel. As with all of my vehicles, I like to nerd out and do as much research as possible, so in this video we will talk about common issues on the BMW R Nine T.  Specifically, we will dive into the engine reliability, bike electronics, sensors and other components. I will also discuss preventative maintenance, what to pay attention to and my bike’s repair history as well.  

If you have this bike, check out another video I have made on this bike where I talk about its hidden features and thing you might not know!

Engine:

Let’s start with the air and oil cooled engine. Is it reliable, do they overheat and have other major issues? Well, since this retro bike uses almost a retro engine so most of the issues have been ironed out by now. The R NineT runs the BMW R1200 camhead engine which is the same engine that’s used in the R1200RT and R1200GS from around 2010 to 2015. Based on owner reports, a typical lifespan of this engine is at least 100k miles and many examples have reached over 200k miles without major engine work. Although not the same engine, BMW Boxer design has been evolving and being modernized for decades before it ever was put into the R NineT. From what I have read, they are low stressed, overengineered and extremely reliable.. if you take care of them.

Now, what is there to take care of on this engine? The main and most important thing to remember with this and many other BMW engines is the oil. You have to check the oil often and make sure it stays around 75% in the little window on the side of the bike. These bikes tend to burn oil for the first 10k miles so it’s recommended to check your oil every 500 miles or so. Some swear that it stops burning oil around 10,000 miles and some say it still burns, just much less oil. You can think of it as a break in period so I guess I have another 8000 miles to go! Since service is expensive on these just like any other BMW and you will have to top up oil at some point, make sure you DO NOT overfill it. Apparently, it’s very easy to overfill and when you do, you will blow your rear main seal in no time.

Some people think that since there is no coolant, the engine won’t be as reliable and will overheat. Generally, it would be fairly difficult to get one of these to overheat but if you live in the desert, it is possible. So, you have to treat them as air and oil cooled bikes; especially since there is no temperature gauge on the early models. Luckily, they are equipped with a thermal shut off so at least the bike will not burn itself down. Starting 2017, they do have a temp gauge and a temp warning idiot light, but it’s not always accurate and can be deceiving. Why is it deceiving? Well, the temperature is read at the cylinder so it’s much higher than anything you’d ever see on a temp gauge on a car. On top of that, the max on the gauge is 143C/289F which isn’t actually the temp where it will overheat. It can go even higher before the warning light and the automatic shut off after that. Anyway, as you can see, it’s a bit confusing, but luckily not something one has to generally worry about. Just keep the bike moving and don’t get stuck in a traffic jam where you sit for 30+ minutes idling in 100 degree heat!

To summarize, this air-cooled boxer motor is a thoroughly tried and tested unit and has been powering boxer range BMW for years, so engine reliability is not really a concern on the R NineT, but do service it regularly like any other BMW. We will talk about some preventative items we can do, later in the video.

Electronics:

Next, let’s talk about electronics. As this is a retro styled bike, the R NineT isn’t on the very leading edge of technology like many other BMW bikes. It has a basic suspension, ABS and traction control as an option and not a lot of gadgets in general. That’s a good thing in m y opinion as there are way less things to go wrong with and it also means this bike can be a keeper for years to come. However, there is one issue that I have seen come up on multiple forums and group. The ABS Sensor. It seems that a lot of people have experienced issues with the ABS sensor going bad which of course disables your ABS and traction control, but also causes the speedometer and odometer to stop working. This is an issue that has been carried over from the GS crowed as it uses the same design. Some of the older models have also had a problem with the wiring loom to the headlights where the wires would run when while moving and eventually fail. BMW has fixed this issue on the 2017+ models with a plastic sheath, so it might be a good item to look into if you have an older bike like I do.

Those with closer to 100k miles should watch out for fuel pump issues and the mail seal failure, but these are not very common.

Other Issues:

Speaking of not very common, let’s talk about other issues or concerns that people have with the bikes that may not necessarily have to do with the engine or the electronics system. One of the biggest complaints on this motorcycle has to be the quality of the seat and suspension. Some say that it’s basically unusable in the stock form for long distances and I have to agree to a certain extent. I’m not a long-distance rider, the most I’ve done at the same time was about 3 hours and I did have to stretch a couple of times to prevent being sore in the back. From what I’ve read, it’s more pronounced with bigger riders and some choose to upgrade. A very good quality, thicker seat can be had for around $500 and the same for a good rear shock as well. Most likely a worthy upgrade if you want to do long distance on the bike.

I also wanted to mentioned the transmission on this bike. Luckily it doesn’t nee it’s own section. Even though it’s a little agricultural in its feel, the transmission is solid and there should be no issues with it for the life of the bike. The only major worry would if the clutch starts slipping, it becomes a major job as the engine has to be split in half. Luckily, the only reports on this are well over 100k miles.

The R NineT also has spoked wheels on some models and that means it has tubes in its tires, this isn’t necessarily an issue, but you can’t fix a flat with a kit or anything like that. I’m not sure I would be comfortable riding on a kit fixed tire, but people have complained about it. This also means that you have to be really on top of checking air in your tires and making sure it’s correct as you can cause problems with the valve stem on hard acceleration with low air pressure. The bikes also handles horrible with about 25 psi in the tires.. just from my personal experience.

This bike can also go through rear brake pads pretty quick if you tend to use the rear brake more than the superior front brakes, but that’s more of a preventative maintenance item.

Preventative Maintenance (and what to pay attention to):

Other than regular oil changes, what else should we look out for on these bikes? Well, of course you should be keeping up with the scheduled items in your manual like the transmission oil, final drive oil, brake fluid flushes **ADD ITEMS FROM MANUAL HERE**. Some people go by the book and some choose to change the fluids every time they put on a new tire. Some also recommend lubricating the transmission shaft splines very 40k or so and getting the valve clearance checked at 12k miles.

If you store your bike over winter, there are a few things to do as well. First of all, get yourself a battery tender, it’s much cheaper than buying and replacing a new battery in the spring. To keep the tires from squaring off, some people overinflate them slightly or ideally you can get a motorcycle stand and lift the wheels of the ground. It’s also a good idea to fill the tank and add a fuel stabilizer on the last ride of the season. This way no condensation builds up and she will fire up like nothing happened in the spring.

Personal Experience:

So, what has my experience been like with the bike. I’ve owned my bike for one full summer at this point and put on half of its 2000 miles. I had to do absolutely nothing but fill it up with premium gas, ride it and smile every time I open the garage door. However, I did receive a small packet of papers with the bike. Let’s take a look at those now. *Show pictures of maintenance done on the bike before I got it.*

I have realized a couple of items for myself since buying the bike. What you see on forums and groups can be slightly misleading as this is a premium brand and product and people have really high expectations. You have to enjoy this bike for what it is, an awesome retro styled roadster. Of course, I’m not afraid to work on my own vehicles anyway so that doesn’t scare me at all.

In general, there really shouldn’t be any issues with the BMW R NineT as it’s mostly gadget free with a drivetrain and engine that have been in the lineup for over a decade in some form or another. Most people, just like myself have had a wonderful experience with the bike, but I think it’s good to look at the bad sometimes and be prepared and on top of things. I’m generally very happy to have experienced the freedom of the open road, the exhilaration of riding on twisties and just cruising behind the bard on this gorgeous bike. Every time I pull up to another motorcycle, I get the same feeling, I’m riding a beautiful machine, a rolling piece of art that meant to be ridden hard! I’m willing to put up with any issues it presents for this experience and I hope you feel the same about yours. If you are looking to buy one, don’t hesitate, go for it and worst comes to worst, you’ll have to get your hands dirty wrenching on a cool bike.  On that note, thank you guys so much for watching, leave your comments and thought below, like the video if you like it and I’ll see you in the next one.

My BMW Z4 (E89) Journey – 2 Year Transformation

Posted on by

This story starts a little different from most BMW owners. It didn’t start at a fancy dealership or even a used car lot. This car took many days of work, some frustration and lots of learning experiences to get here and I love it for it. So, let’s start from the beginning when this beauty showed up on a back of a truck, looking sad and broken, to now, 20,000 miles later and still bringing a smile to my face every time I drive it. I hope you enjoy this trip down the memory lane of my journey with the BMW Z4. If you hit that like button, I will even talk about my favorite things about this car I didn’t except!

I’m sure I’m not alone in this, but almost on daily bases I scroll through different website looking for cars I can’t afford or projects I should definitely not take on and wonder.. what would happen if I just bought it. One of those nights, I stumbled upon a few very blurry pictures of a BMW Z4 that was listed at an auction house and only had some ‘mechanical issues’. As not many people were bidding on it, I thought it was a perfect opportunity to get my hands on a very unique hard-top convertible. To be honest, I’ve never even seen one in real life before buying it. Hit that like button for buying cars sight unseen!

The rebuild:

I was scared and excited, I won a car at auction that I knew almost nothing about. A week later, a car hauler pulled up in front of my house and that’s the first time I saw this Z4. I could see the sexy curves of the body behind all of the dust and dirt and then I heard it start up as it was driven off the trailer. It sounded hurt, very hurt. With my very limited experience at the time, I was excited to jump in and get this engine repaired! After hours of Youtube videos and forums posts, I was convinced that the noise coming from the engine was timing chain related.

Attempting a timing chain replacement for the first time felt very ambitious and perhaps a little dumb, but what did I have to lose? After 2 weekend of work, I replaced the timing chain, the timing chain guides and sprockets and everything else along the way.. but when I started the engine, I heard the same knock, knock.. knock.

At that point I knew I mis-diagnosed the issue and the real issue with the engine was the famous rod knock.. which I later confirmed by taking the engine apart. Check that video out at the link in the description if you’d like to see the damage. The best course of action at this point was to get a replacement engine. Luckily I was able to source a 2015 engine with only about 30,000 miles on it for a very good price. This was the new plan, replace the engine. Surprisingly, engine replacement has gone smoothly and I honestly believe that it has given me a lot more confidence with working on cars in general and later on rebuild the BMW N55 engine.

When the engine fired up for the first time, missing it’s intake and exhaust and still barely attached to the car. I was on cloud nine and figured I’ve done the hardest part.. but of course, it’s not so easy. What I failed to realize is that there are many N20 engine variations. For the longest time, I had lean codes that I just couldn’t figure out. I replaced the HPFP and fuel sensors, tested for vacuum leaks using a smoke machine, replaced various other sensors and even put a new set of sparkplugs and coils, but my lean code remained. This is when I learned more about the differences between different year N20 engines. Turns out, BMW has upgraded the injectors from EU5 to EU6 sometime between when the Z4 was manufactured and when the donor engine was produced. I installed the old injectors into the new engine viola! No more lean codes! If you are doing something like this, you will also have to replace the Oil sensor and the HPFP has a different connector.

With the engine running like a champ, I started fixing many other little items on the car and cleaning everything I could. One of the items that I knew had to be done was to service the hardtop roof. It’s super important that these are very well maintained as repairing one of these is not easy at all. How hard is it? I called my local BMW dealers and out of 3, only 2 would even take a look at it. Anyway, I have a full video on how to properly lubricate all of the moving parts and moisturize the rubbers so it doesn’t leak and squeak.

One issue I still have with the engine is hesitation or failure to start up when the engine is fully warmed up. I’ve tried over 20 different items to narrow this down and have found nothing. I won’t go too much into it as I’m planning on making a video about this in the near feature, so subscribe and see what happens!

The Mods:

Even though I enjoyed how the car looked stock, I wanted to make it a little more my style. So, I did what everyone else has done on their Z4s and replaced the front grill from chrome to black and installed white LEDs to modernize the front end a little bit. I then installed a body color spoiler to lift up the back end as well. After the spoiler I tinted the windows for that slick hard top roof and even though I debated whether I should or shouldn’t tint a convertible, I love it! Since my Z4 is pre-LCI, I also decided to swap out the old blub looking side indicators for newer style chrome ones and painted the side reflector body color. These two modifications changed the side profile and gave the car a sleeker look. 

The biggest difference as far as style was done by the new wheel and tire combination. I went for the M437 style rim that normally comes on a BMW M3 and M4. I was surprised that my little Z4 happily accepted 19 by 9s on the front and 19 by 10s on the back. I had the wheels wrapped in some Nitto tires and this combination has been a dream ever since. Never rubbed and the ride has been decent as well. I must say, this has been my favorite change on the car and I love how it completely transforms the look. Later-on I converted to studs for ease of changing the wheels and tires to the winter set and this is what it looks like now.

Since I didn’t want to drill my intact front bumper, I installed some magnets behind the bumper cover and modified the license plate bracket as well and now I had a removable license plate I could use when parking on the streets.

For a while, I left it alone and just enjoyed driving the car, but then I had an itch that needed to be scratched. I wanted better sound out of the exhaust. I started by deleting the resonator and replacing it with a super sprint stainless steel pipe. It definitely made a difference and added many pops and burbles. Half a year later, I upgraded it further with a super sprint sport muffler and now she sounds just perfect.. well, at least for a 4 cylinder turbo engine.

Driving:

And here we are.. after all of the stuff I have fixed, upgraded and updated.. what have I been doing with the car lately? Well, we have had a beautiful summer and I enjoyed it taking it on long drives into the country, city and just around the neighborhood. If you truly enjoy driving and a car is more to you than just an appliance, this Z4 will keep you engaged and having fun while the sun shines down on you and the wind blows through your hair. I like that it doesn’t pretend to be a hardcore, aggressive sports car. It’s a sport, fun to drive grad tourer.

Conclusion\Future Plans:

To finish off the video, let’s quickly look into the future plans and what I want to do with this car. To start off, this is a long-term car for me. I’m not selling it any time soon, so expect to see it on this channel for years to come. I will get the startup issue fixed on it, hopefully sooner than later and I’m also planning on installing an Apple CarPlay system to bring the infotainment department into 21st century, but the good ones are at least $750 at the moment and I’m not sure it’s worth it. I mostly focus on driving and enjoy nature when I’m in this car, but I also like the convivence it provides. Either way, after two years of ownership and two years of videos, let’s continue this journey for many more! I hope you stayed tuned by subscribing and leave some ideas for me as well down in the comments. On that note, thank you guys so much for watching, I really appreciate it and I’ll see you in the next one.

BMW Aftermarket Apple CarPlay 1 Year Review

Posted on by

Hey guys and welcome back to the SimpleCarGuy channel. About 9 months ago I posted a video where I installed an aftermarket Apple CarPlay and Android Auto module in my 2014 BMW 550i. Since then, I have answered many questions in the comments, emails and on my Instagram, but it seems that I’m answering the same questions over and over again and now that I have used it for many months, I figured I’d put it all in one place. So, in this video, I will talk about the Pros and Cons, missing functionality, extra features, compatibility and answer all of your questions as well.

I’m making this video so that you can make an informed decision and not waste your money, so hit that like button if you like the video and leave your comments down below with any additional questions.

When I first installed this aftermarket Apple CarPlay on my BMW, I got lots of people asking about the quality and all of the features. Of course, at that time I have only used the system for a day or two and couldn’t give all the answers, but now I’m ready to tackle this one.

The most common concern for people was whether it would fit their specific year and model car. Well, to answer this, you have to understand BMW’s iDrive systems a little bit. The earliest system you can install Apple CarPlay using this method and without replacing parts is the iDrive CCC which came out on some BMWs in as early as 2004 model year. This system was in use until about 2010 model years on some cars. So, if your car has THIS screen, you need CCC version of the device.

The next system was Car Information Computer or CiC and it looked like THIS. If your screen looks like this, you will need an aftermarket unit made for CiC iDrive. You cannot interchange these unless the unit you get is made to work with different versions. This iDrive version was on BMWs between 2009 and 2014. I will post a list of different models in the description or comments for your reference.

BMW introduced a further update to the iDrive System in early 2012 and called it the NextBestThing also known as the NBT, which is what I have in my car and what I showed in the video. This is for 2013-2018 model years, but once again, it varies depending on the model. As an example, on the BMW 5 series F10, it’s from 2014-2016 model years.

The last system you can update using this method is the iDrive NBT EVO which of course replaced the original NBT iDrive system and is still being used on many models today and it looks like THIS.

I hope it clears up some of the questions as to what unit you need for your car. Please do your research, refer to the list I the description and make sure you understand which iDrive you have before you order. If you are more adventurous, you can also remove the screen in the car and take a look at the connector on the back. On F10 5 series, if the connector has 4 pins, it’s the CiC version and if it has 6 pins, it’s the NBT system. If you are having trouble with this, leave a comment down below and I’ll do my best to help you.

Alright, so you know which unit you need, but you have some questions. Let’s see if we can clear some of those questions up.

I know my biggest concern before installing this unit was how fast and how accurately it would connect to my phone. Well, it connects perfectly about 98% of the time. What do I mean by that? Well, if you don’t have your Bluetooth or WiFi on on your phone, it will sometimes connect half way and you are just stuck at THIS screen (show screen). You then would have to manually connect to the correct system in Bluetooth or WiFi Settings. Now, that’s not the only way it can mess up the connection. I have had times where it just refused to connect and I had to restart the unit by holding the back button for 3 seconds. This has happened about 10 times in the 9 months I’ve been using this. That’s actually a very small number in my opinion and I’ve been very happy with how fast and reliable it has been overall.

My second biggest concern installing an aftermarket Apple CarPlay unit was audio quality. Most BMWs have a wonderfully balanced and great sounding system, so I was worried it would ruin the experience. Once again, it’s not perfect by any means. It sounds great at almost any sound level, but as soon as you turn it up past a certain point, there is a hissing noise that becomes very apparent. Of course, the volume has to be very loud at this point and there has to be a silent moment in whatever you are listening to. I think this is my main concern, but not a deal breaker since it’s only at very high levels. To reduce this as much as possible, go to the settings and make sure your volume is set to the max.

Now let’s do some rapid fire questions and then finish the video with my final thoughts.

We have already answered what cars it can be installed in and the different options, but does it use the original camera or do you have to get an aftermarket one? You can switch between Aftermarket and Original in the settings. So, if your car doesn’t have one, you can install an aftermarket one and use it.

How does the camera work when you are using CarPlay? It quickly switches back to the OEM system and it works as normal, including the curving lines and sensors.

Nice, right? So, what about the radio? This device does NOT have a radio built in and you cannot mix the two audio sources together. The best solution for using Google Maps and listening to the radio at the same that I found was to play the radio station you want, or save it on one of the memory buttons, go to Apple CarPlay, but do not switch the audio source to AUX and use it without any sound.

Speaking of switching back and forth, how easy is it to switch between the systems? This system starts up when you unlock the car and the phone connects automatically, so to switch back to the BMW system, you just have to hold the BACK button for 3 seconds. This as far as I understand shuts down the unit, so when you hold BACK again for 3 seconds, it starts up again and your phone reconnects. There is no sleep mode type of function.

Cool, so we can switch between systems, but does it use the original BMW microphones or do you have to wire the one that came with the unit? Luckily, the answer on this one is YES, it does use the original microphones in the car. If your car didn’t have one or it’s broken, you can use the one that came with it as well, but you’ll have to route it the proper position. These are used for both Siri commands as well as voice calls.

Speaking of voice calls, how is the sound quality? The quality coming in sounds absolutely perfect; however, I have had a complaint from someone on the other line saying that I sounded like I’m on speaker, so I went and played with the options. Enabling this feature made it sound much better in my car, but I think it depends on your car set up. It still does not sound as good as original BMW as echo does happen on some occasions. Overall, it’s pretty good, but not amazing. Luckily, there is an option to allow phone calls to be handled by the original BMW system.

What about playing music, how is that experience? When used wirelessly, there is a slight delay in audio. Of course, this isn’t a problem if you are listening to music, but can be noticeable when watching a video. It also isn’t nearly as bad as it is on the original BMW Bluetooth audio. This problem can be easily fixed by plugging in the phone via USB. You can also use AirPlay, which is wireless and has no delay whatsoever. It clones everything on your phone to the screen, including videos, movies, apps etc. One feature I miss from the original system is volume based on your speed. The volume does not adjust automatically as you go faster or slower.

Now let’s talk a little bit on how well it integrates into the car. The iDrive controller and buttons around it works as you would expect. All of the buttons on the steering wheel work great as well and you can even use the little scroll wheel here on the steering wheel as the secondary controller. I use this most of all as I can keep my hands on the wheel and perform most of the functions.

One item that I wish would have been integrated is the Heads-Up-Display. While it still displays your speed and other BMW items, it does not show any music or navigation information. So, if you rely on the arrows and instructions being up on your windshield while using GPS, this might not be for you. I did a little bit of research on this and it looks like this display is basically ran by a different computer/module and since this device is just sitting between the head unit and the display, it cannot control it.

The last item is more related to Apple CarPlay in general. I’ve had a few questions on what apps are available and can you install stuff like Netflix or YouTube? Apple CarPlay allows you to basically install only Navigation and Audio related apps. So, you can have Google or Apple Maps and Waze for your navigation. Spotify, Apple Music or even radio apps like the TuneIn radio or iHeartradio for audio and even podcast and audio book apps. Besides those, WhatsApp and standard messaging apps are available, but mostly only work through Siri. You cannot type in a message directly as an example. There are of course some other ones, like the SpotHero app to find and pay for parking or PlugShare to find local charging stations if you have an electric car.

Well guys, this video turned out much longer than I expected, but I really wanted to answer as many common questions as possible and make the decisions easier for you. So, what do I think of it and would I do it again? Well, this may not be as good as an OEM installation of Apple CarPlay or Android Auto, but it damn sure is 10 times better and easier to use than the original BMW navigation and media player. I also love that my fiancé can easily use her phone with the car without an hour set up.

BMW R Nine T Hidden Features

Posted on by

Hey guys and welcome back to the SimpleCarGuy channel. Today we are taking a look at some hidden features, tips and tricks and thing you may not know about the BMW R Nine T, also known as the best modern retro styled roadster.

If you have been riding bikes for longer than I have been alive or have had BMW bikes for a while, I’m sure you already know all of the ones below but hey.. maybe there is one that you don’t! If you are a pro, I’d love to hear some tips and tricks below in the comments so we can all learn something cool or new. For everyone else, stick around and I hope you enjoy the video. Let’s get to it!

So, what are some things you may not know about this bike?

  1. If you have owned a modern bike, you probably think that you can just turn off ABS or other safety features with a button, but on the BMW R Nine T you cannot turn off ABS unless you have the new version with throttle by wire. In this case your bike will have traction control as well and you can turn off both using the ASC button.
  2. You may not be able to turn of ABS, but did you know that this bike has an OBD2 port? With a $15 dollar adapter, you can scan the bike, see live data and if you have BMW software or buy a fancy motorcycle scanner, you can do so much more! Very cool.
  3. So, we can read this bike’s computer, but we can also plug in a dedicated GPS or phone charger by using the onboard power socket that’s hidden on the left side of the bike here. This socket is protected just like BMW cars where if the battery voltage falls below the level required to start the bike, it will be deactivated.
  4. If your battery does go below required voltage at some point, you are in luck, because this bike has a built-in trickle charger port. Since the BMW R Nine T uses AGM batteries which can be a little finicky when it comes to charging, you have to follow some steps. You must leave your motorcycle on the trickle charger over winter if not riding or the battery will be trash by spring. IN fact, this bike has had a new battery installed after only 800 miles because the previous owner left it over winter and the fact that it took 2 years to do that many miles. In fact, I have already done about that many miles in the few weeks I’ve owned it. BMW Recommends to plug the bike in if not redden for more than 4 weeks.
    1. Some additional notes on this, you cannot jump start the bike from this socket. The wires are not thick enough and rated for high current and can cause a fire.
    1. It’s also recommended to only use this socket to charge as onboard electronics monitor this socket and know when the battery is fully charged and switch off the onboard socket to make sure if you get a cheap battery tender, you won’t fry your bike or battery. If you’d like to charge you battery directly, it must be disconnected from the bike first.  
  5. The next item on my list is the TPMS or the lack of TPMS sensors on this bike. This is, again, old school so kind of expected, so check your tire pressure. When I picked up my bike and rode it home, I was wondering where was this great handling that everyone has been talking about. The bike kept trying to stand up and was slow through turn. The 15 pounds of pressure made a huge difference and how the bike is very confident on the road and the difference is huge. This is a bit motorcycles 101, but no dumby light here, so check manually.
  6. Speaking of dumby lights, that’s all you get for fuel level as well. There is no fuel gauge on this bike, but you will be informed with a simple light once it’s on reserve.
  7. Number 7 is a parking light. This is pretty common in Europe as far as I understand, but pretty rare on bike in the states. To turn it on, switch off the ignition and then immediately hold the indicator switch to the left until the lights turn on. Cycle the ignition to turn it off.
  8. A feature that surprised me on this bike was actually the auto-cancel indicator switch. If you forget to turn it off, it will actually turn itself off after 10 seconds or 300 meters (almost 1000ft) of driving.
  9. Going back to the battery, if you even need to jump-start the bike, you have to use the connection point on the positive battery terminal under the seat and the negative terminal on the right-side cylinder. Now, of course, the seat cannot just be opened, so it has to be removed. Luckily, you only have to remove 1 screw to remove both seats. Your bike should come with a key for this screw, but I got mine used so I use an actual socket. My replacement Is on the way.
  10. The last thing you may not have know is that you can removed the baffle in the exhaust known as the DB killer to improve the depth of the exhaust sound. It only takes 5 minutes and very easy to do. I have a video on how to do that exactly if you’d like to check it out. It’s also easily reversable if you don’t like it.

A few things you should know about the bike is how to check your fluids! I feel like it’s even more important on a motorcycle than it is on the car. As an example, to check your oil, you have to make sure the bike is warmed up and on leveled surface and hold the motorcycle vertical. Then you have to wait 5 minutes and check the little window. The oil should be between top and button. This and much, much more is in the manual for the bike. People complain that manuals now-a-days only have stuff like don’t drink battery contents, but this manual is actually very useful. You can even learn how to remove and reinstall front and rear wheel. Speaking of wheels and tires, this motorcycle has quick release front axle. Who knew such thing even existed!? I was also surprised that on a modern, although retro looking bike, you would still have tube tires, just like on my 1976 Honda CB360!

Well, that’s all I have or you guys today, I hope you learned something new or at least found it interesting. I’d love to hear your opinion or features I don’t know about in the comments down below, like the video and subscribe to the channel for more content and I’ll see you in the next one!

BMW R Nine T DB Killer Mod

Posted on by

BMW R Nine T has a refined and impressive sounding horizontally opposing twin cylinder engine, but as with most enthusiast vehicles, we want more! In this video, I’m doing my first mod on the bike and the goal is to make the exhaust sound just a little louder and better. I’m removing the DB killers from the Akrapovic mufflers which gives the exhaust note a throatier sound and a lot more depth. I show how to remove the DB killers (exhaust baffle) and the the different of how it sounds before and after giving you more sound for free.

BMW R NineT Review – Perfectly Unrefined

Posted on by

Intro:

I BOUGHT A BMW R Nine T! Hi guys and welcome back to the channel! Today we are taking a look at pretty much my dream bike. In this video I will go over why I think this is the best modern retro bike and why I wanted it so much. I will also talk about the riding experience and future plans. So, stick around and enjoy this beauty with me!

History:

We’ll start with a little bit of history; I’ll keep this very brief. To celebrate the 90-year anniversary, BMW decided to release a ‘limited run’ bike that would celebrate their heritage and the end of an era using up the remaining engines. That was supposed to be it, but what they didn’t realize is that people absolutely fell in love with these bikes and they have, maybe, un-intentionally, re-ignited the retro styling and the passion for BMW bikes in a lot of riders. Since then, they have released many different versions of the R Nine T, but I went for the original black and silver BMW R Nine T which I would consider to be the top of the range. I love the color schemes on the other versions, but I wanted all of the best this model offers to get the full experience.

If you love the look of this bike as much as I do, hit that like button! Not only does it help the channel out, but it also encourages me to make more videos!

First Impressions

Why I got it:

So, why did I go for the BMW R Nine T? You might think that I bought this bike purely because it is a BMW and while that would be a reasonable assumption judging by my car history, there are a few good reasons other than the brand to get this motorcycle. The first and most important for me was the way it looks. This bike is absolutely beautiful in my eyes and I have loved the design ever since I saw one for the first time. I adore the boxer stance and how it makes the bike look old school and muscular and classic. The heritage can be seen all the way back and I think that’s really cool.

Of course, you can’t buy a bike on design alone, so I test drove one and I found out that there is something very enjoyable about this bike, it has a very sincere mechanical heart and soul. It has all those things that you’d want in a retro bike. As I put in the title, it’s perfectly unrefined and I fell in love with THAT. I’m sure a lot of this has been actually engineered into it, but it feels just so right, especially when you are sitting at a stop light and you can feel the rumble between your legs and the twisting torque from the engine when you give it some revs. It’s glorious.

Other than the superb design and the amazing engineering, this bike has a great value retention. I have been monitoring prices over the last 2 years and they have remained pretty much the same. That fills me with confidence that in a few years, I can trade it for something different without a huge lose.

Now, why did I get this specific one? Well, I wanted the original R Nine T, not the Pure or the Scrambler and it also had ONLY 1200 miles on it. The bike was for sale by owner only 15 minutes from my house with full-service history from BMW where it got a new battery and oil change as well as all of the recalls done by the dealer.

Specs:

So, what are the specs? If you’re not familiar with the bike, you basically got half a Porsche or Subaru motor between your legs as it’s an old school air-cooled horizontally opposing twin cylinder 1170CC, 110 horsepower and 75lb ft of torque engine. A version of this engine used to be in most BMW R bikes for quite a long time and has always been popular and recently, very reliable. The power delivery is very linear and smooth, so the bike pulls with confidence at almost any rev range. As most modern bikes, this comes standard with ABS, but it also comes with huge double floating discs and 4 piston calipers on the front and a 2-piston caliper set up in the back. It also features a fully adjustable upside-down telescopic fork that’s only available on the original R Nine T. My bike has no options as far as I can tell and that isn’t really a problem for me, I only wish the previous owner checked the heated grips options when buying it new.

Riding experience

You can of course read all of the specs online, but what does it translate to when you ride? Well, I want to start this by saying that I have only been riding for a year and I have very limited experience with other bikes. The bike I have spent the most amount of time riding was my old-school Honda CB360 that has been converted to a café racer/brat bike. So, that means my experience and opinions aren’t really based on other bikes, it’s more of a feeling I get from this as my first modern motorcycle.

Weighting in at almost 500 pounds with all of the fluids, my fear was that this thick and heavy girl will be hard to handle for a novice like me, but all the weight is down low, so the center of gravity is low also. It’s kind to the newer riders despite the girth. It actually feels somewhat lightweight and handling has never been a problem for me all.

I also really enjoy this relaxing, but engaging upright riding position with the shoulders wide and plenty of visibility and comfort on longer rides. The grips are large and wide apart, creating a large area for the wind to catch you, but somehow the wind has not been an issue for me, at least at normal/legal speeds. I’ve learned to sit slightly back at higher speeds and lean down to make my shoulders not as wide. So, I do not wish for a windshield or a wind deflector like some people have noted on forums. I was worried about this quite a bit when buying this bike, but it just adds to the experience.

One of my favorites while riding the BMW R Nine T is how confident it is on the road and how it makes me feel like a good rider, the brakes are simply incredible and feel like a super bike with lots of stopping power and adjustability based on your liking. I love the torque-y engine and how you can feel the vibration when you rev it up from idle. That torque and power doesn’t seem to stop and it just keeps pulling and pulling very confidently through the rev range and when you let off the throttle, the pop and bangs make me smile like a kid every single time!

There are a few things that I don’t love as much on the bike and the first one has to be the comfort of the saddle. I think it looks great and I wouldn’t want it to be thick, but after riding for a couple of hours it gets slightly uncomfortable and my butt and thigh area was starting to go a little numb.

What I also didn’t expect was the driveshaft and transmission clunk when shifting, but I’ve learned that this is normal on all BMW boxer, dry clutch and drive shaft motorcycles and have gotten used to it by now. It’s very mechanical feeling so it adds to the experience. I also had to get used to the limited steering lock that pulls you further into a corner at low speeds that made me uncomfortable at first. It also seems to have a wider turning circle than I would expect.

Future Mods:

A lot of people rush to modify cars and bikes shortly after getting them, but I actually prefer to drive or ride my vehicles for a while before doing so. I’m still learning about the suspension preload and different adjustments you can make on this bike as far as the suspension. Not to mention you can change how the clutch and brakes feel and how aggressive they are. There are still many knobs to explore and get ‘just right’. (show small clips of these as b-roll). I will be looking for alternative mirrors as they are large and pretty ugly, but I think that should be an easy swap. I also would like to put a brighter and whiter LED in the headlight and tuck in the back light and license plate cluster. It sticks out too much in my opinion and can look much better. The last item on my to do list so far is to do the exhaust mod to make it a little bit louder. What are your thoughts? What would you modify or change on this bike or would you leave it as is and just ride? Let me know down in the comments.

In conclusion, this is a modern classic blend that’s comfortable enough to be a daily driver with amazing craftsmanship. It’s all the things that are good about the old bikes, without any of the bad. Well, that’s all I have for you guys today, like, comment subscribe and I’ll see you in the next one.

BMW X6 M50i – First Impressions, Overview, Features, Interior, Engine, Exhaust Note

Posted on by

Introduction/Overview:

Welcome back to the SimpleCarGuy channel. Today, I have something special, A BMW X6 M50i! It’s not a secret that I like small funky cars, so what am I doing with this high fashion SUV? Well, this one is a little bit different from the rest. Not only is it an SUV, but it’s also a COUPE in a way and oh yeah, it’s definitely funky. In this video, we will take a look at the exterior and talk about its distinctive looks, check out the interior, including the tech and other fun features, go over the engine and listen to that sweet V8 under the hood and then take it on a short little drive.

If you’d like to see more videos about this car or even other BMWs, hit that like button to support the channel.

Exterior:

Let’s start with the exterior. Some people believe that every new car, especially from a luxury brand like a BMW is beautiful. That has proven to be controversial when you take a look at the new 4 series with its gigantic grills and the same can be said for the rear of this car.  The front of the X6 is unmistakably BMW with slightly oversized kidney grills and an evolution of the angel lights. It’s striking and aggressive and in this white color, it’s all on display. Car makers can get away with funky lines and some design choices by painting the car black or some other dark color, but here.. you can see it all. This brings us back to the rear of the car where there is a lot of this ‘design’. This X6 has quite a distinctive look that you really have to love. BMW clearly went for style over function with this design sacrificing the room and convenience of the X5 with the slopping rear hatch design. Even if you don’t love how it looks, which you should if you think of getting one, IT IS subjectively speaking quite interesting to look at.

Going around the car, there are a few things to pay attention to. At the front, we have these beautiful full LED or even optional laser headlights and of course full LED taillights in the back as well. I don’t even think there are any non-LED lights left on this car, but I could be wrong. Here at the back, we can also see the defuser that BMW puts on their M-Sport and M cars, it’s given the back a little more segmentation, which could be a good or bad thing. We can also see the quad exhaust pipes that fit into 2 pods. These sound fantastic, so stick around to hear it from the back as well as from inside the car. Another fake item on the exterior that I find kind of funny are the fake vents, not really sure why they would include these as BMW isn’t really know for these.

Thinking of other cars in this segment, what is the X6 really up against as far as looks? There isn’t anything very interesting other than the Lamborghini Urus, but that’s almost in a different category. I much better prefer this to the Mercedes GLE Coupe or the Audi Q8. I think we need to embrace cars and SUVs that look different. We can’t complain that all cars are boring and look the same but then also hate on the makers that try something different. Now, let’s go check out the interior and see what we can find.

Interior:

Alright, so what do we have here? From the start, it feels very rich and luxuries when you get inside and even though it’s very unique looking on the outside, it’s not nearly as unique on the inside. This X6 replaced the X5 I made a couple videos about a few months ago and you can clearly see the interior design has elevated in this generation car. It’s definitely not a complete overhaul, it’s more of an evolution, the screens got bigger, some buttons disappeared, but if you’ve been in a current gen BMW, you have experienced this interior as well. Of course, the fit and finish and the quality of the materials is on another level and it adds many extra features inside that separate it from the more basic BMWs, such as the heated door and middle armrests and it even has some unique features that are not found on the X5 like this door handle area. It feels big and spacious with these amazing 20-way adjustable seats that can adjust just about anything you’d ever want to adjust. (see if they have massage). Speaking of comfort, I think this M sport steering wheel is one of the best in industry, something you’d want to hold on to for hours at a time.

Now let’s take a quick look at the center console area. This interior feature 2 12-inch displays, one for instrument cluster and one for the iDrive or as BMW now calls BMW Live Cockpit Professional. You can control pretty much anything on this car from this screen, which BTW is a touchscreen, but luckily you can still use the physical controller to perform all functions, which I love. I’m also glad that the HVAC system hasn’t been completely moved to the iDrive and you still get physical buttons that you can hit while driving. They might be a little small, but thankfully the trend of removing physical buttons hasn’t hit BMW yet.

Being a new BMW, it has very impressive tech and one of my favorites is the backup and 360-degree camera system that overlays a 3D model making it kind of fun to use. Camera views can also be recorded and even viewed from the phone that has been paired to the car. The sounds system is just as impressive, it has nice deep bass and high-quality midrange and of course you can connect using Apple CarPlay or Android Auto to stream your favorite music.

Moving to the back, the seats here are actually fairly comfortable and have plenty of space for someone that’s 5’10 with a few inches to spare. No issues with leg room either even with the front seat generously moved back. The way they achieve this is by basically making bucket seats in the back, dropping you back and down a little so you actually do have plenty of space and don’t feel cramped at all.

Trunk space is of course not as big as the X5, but the owner of this vehicle was able to fit plenty of stuff while moving and remember, style over function.

Engine:

This new X6 comes with two different options for the engine, the B58 straight 6 turbocharged engine that’s in other M-Sport cars and also in the new Toyota Supra, but those are much smaller and lighter cars, so for this beast, you want the n63 TwinTurbo V8 engine.

It’s important to understand that this is the n63TU3 engine which is the updated version of the engine you got on the last gen 50i cars like my F10 550i. Of course, this one makes 80 more horsepower and 70 more pound feet of torque so it’s definitely been worked on since then. To be clear, it is not the S63 engine that comes on the X6 M, but I think that’s a good thing. Sure, you get less horse power, but these are much more reliable and cheaper to maintain and fix in the long run AND who can complain about 523 horses and 553 torques under the hood of a family car? That’s pretty insane if you ask me especially since you get M level performance with the room and comfort of an SUV.

This beast can get to 60 miles an hour in about 4 seconds if you use launch control, but sadly this isn’t my car, so I will not be showing you this as it is taxing on the transmission, BUT if we can get 1000 likes on this video, I will convince the owner to try it and we’ll make a video about it.

We don’t have any data yet, but with it being the 4th iteration of the N63 engine, it should be fairly reliable over the years and hopefully last a long time, but time will tell.

One thing I know this engine isn’t very good at is fuel economy. You won’t get what anyone would consider good fuel economy out of this, but honestly.. who cares. If you go for the m50i version, you clearly care more about the raw power aspect rather than saving dollars at the gas station. I think it’s finally time to start it up and see what it sounds like.

Exhaust Note:

Since this is an M-Sport car, the engine sound is very important to the overall experience. When you first start the car, you can hear the aggressive V8 rawr and come to live. It sounds great on the outside no matter where you are. On the inside, the engine sound is pumped in through the speakers, so it can sound very loud on the inside, but luckily it can be turned off and you get to hear real exhaust without any fakery. There are a few options to pick from, so you get to decided depending on who you have in the car and what kind of impression you’d like to leave on them. I’d probably turn it off completely and just enjoy the raw engine sounds.

Driving/Summary:

Woooohooo! Wow that is not something you expect from a 5200 pound SUV. The acceleration on this X6 feels very strong and it definitely pushes you into the seat even with half throttle. And the sound, it sounds like a hot rodded V8 when you punch it, yet it is refined to the highest German standards.

As most big BMW cars now-a-days, this SUV has xDrive and being in Chicago, this is a huge benefit and reassurance you won’t get stuck in the snowy winter. Luckily the xDrive here is rear biased, prioritizing the rear wheels and allowing for some fun and better driving characteristics balancing the car out by having the front wheels concentrate on the steering.

Being a big car, I was expecting it to drive.. well, like a big car. But honestly, it doesn’t, It feels like a very sturdy sedan. Somehow, BMW has managed to make this feel sporty. planted and handle well, especially in sport mode where the steering goes heavy. It reminds me of my e92 335 I had many years ago with it’s heavy hydraulic steering. Unlike the e92, you do sit very high up in the air and it almost feels like it wants to understeer, but all things considered, it’s really, really nice to drive, everything fits me perfectly and is very easy to reach from the driving position as well.

Other than the exhaust sound, it’s very quiet inside and some of these even come with the acoustic glass option, so you will definitely be very well insulated from the outside.

Well, that’s about all I have for now on the BMW X6 M50i, if you’d like to see more videos on this car, leave a comment down below and let me know what exactly you’d like to see. Don’t’ forget to subscribe for more car videos and I’ll see you in the next one.